© National Instruments Corporation
5
SCXI-1324 Installation Guide
Figure 2. SCXI-1324 Signal Connections
Connecting the Terminal Block to the SCXI Module
To connect the terminal block to the SCXI module front connector, refer to
Figure 3 while performing the following steps:
1.
Connect the module front connector to its mating connector on the
terminal block.
2.
Tighten the top and bottom thumbscrews on the back of the terminal
block to hold it securely in place.
Figure 3. SCXI-1324 Terminal Block Installation
1
Assembly Number
2
Product Name
3
Serial Number
1
SCXI Module
2
SCXI-1324 Terminal Block
3
Thumbscrew
1
2
3
1
2
SCXI
1100
3
Summary of Contents for SCXI-1324
Page 9: ......