SCXI-1384K Custom Terminal Block Kit
10
ni.com
3.
Connect the safety earth ground to the safety ground lug. Refer to the
Safety Information
section for connection information.
4.
Connect the wires to the terminals by soldering the stripped end of the
wire onto the terminal. Trim all soldered connections to a 1/16 inch
maximum on the back side of the PCB. When connecting your signals,
refer to the labeling in Figure 6.
Figure 6.
SCXI-1384K Custom Terminal Block Signal Connections
1
Row Connection Solder Terminals
2
Strain-Relief Bar Assembly
3
Safety Ground Lug
4
5 V Reference
5
Ground Reference for Trigger Signal Solder Terminals
6
Scanner Advanced Output (SCANADV) Solder Terminal
7
External Trigger Input (EXTRIGIN) Solder Terminal
8
Column Connection Solder Terminals
2
7
6
5
3
1
8
4
