5
13. Connect the other end of the cable assembly to your TBX-1325 terminal block connector and
secure the SH48-48-A cable by tightening both backshell mounting screws. See Figure 4.
See Figure 5 for the completed installation.
1
1
5
3
3
2
4
1
Backshell Mounting Screws and Ears 3
Captive Cover Screws
5
Signal Wire Entry
2
Shield Grounding Solder Lugs
4
Terminal Block Connector
Note:
The SH48-48-A cable is not shown in the exact position for proper connection to the terminal block connector. See
Figure 5 for the completed connection.
Figure 4. Connecting the SH48-48-A Cable to the TBX-1325 Terminal Block
Figure 5. The Completed Installation
