background image

Why Doesn't the USRP Device Appear in the NI-USRP
Configuration Utility?

1.

Check the connection between the USRP device and the computer.

2.

Ensure that the USRP device is connected to a computer with a gigabit-compatible
Ethernet adapter.

3.

Ensure that a static IP address of 

192.168.10.1

 is assigned to the adapter in your

computer.

4.

Allow up to 15 seconds for the device to completely start up.

Why Don't NI-USRP Examples Appear in the NI Example Finder
in LabVIEW?

NI-USRP does not install examples into the NI Example Finder.

Related Information

NI-USRP Examples and Lessons

 on page 9

Network Troubleshooting

Why Doesn't the Device Respond to a Ping
(ICMP Echo Request)?

The device should reply to an internet control message protocol (ICMP) echo request.
Complete the following steps to ping the device and receive a response.
1.

To ping the device, open a Windows command prompt and enter 

ping 

192.168.10.2

,

where 

192.168.10.2

 is the IP address for your USRP device.

2.

If you do not receive a response, verify that the host network interface card is set to a
static IP address corresponding to the same subnet as the IP address of the corresponding
device.

3.

Verify that the device IP address is set properly.

4.

Repeat step 1.

Related Information

Changing the IP Address

 on page 6

Why Doesn't the NI-USRP Configuration Utility Return a Listing
for My Device?

If the NI-USRP Configuration Utility does not return a listing for your device, search for a
specific IP address.
1.

Navigate to 

<Program Files>\National Instruments\NI-USRP\

.

2.

<Shift>-right-click the 

utilities

 folder, and select 

Open command window here

from the shortcut menu to open a Windows command prompt.

USRP-2920/2921/2922 Getting Started Guide

  | 

© National Instruments

  | 

13

Summary of Contents for USRP-2920























Reviews: