background image

Table 6. LED Indicators (Continued)

LED

Description

Color

Indication

 

 

 

 

E

Indicates the reference lock status of
the LO on the device.

Off

There is no reference signal, or the
LO is not locked to a reference
signal.

Blinking The LO is not locked to a reference

signal.

Green

The LO is locked to a reference
signal.

F

Indicates the powers status of the
device.

Off

The device is powered off.

Green

The device is powered on.

USRP-2921 Front Panel and LEDs

MIMO EXPANSION

GB ETHERNET

POWER

RX 1 
TX 1

REF IN

PPS IN

A
C
E

B
D
F

NI USRP-2921

2.4 - 2.5 GHz, 4.9 - 5.85 GHz

RX 2
TX 2

6 V      3 A

Table 7. Connector Descriptions

Connector

Description

 

 

RX 1

TX 1

Input and output terminal for the RF signal. RX 1 TX 1 is an SMA (f)
connector with an impedance of 50 Ω and is a single-ended input or
output channel.

RX 2

Input terminal for the RF signal. RX 2 is an SMA (f) connector with an
impedance of 50 Ω and is a single-ended input channel.

REF IN

Input terminal for an external reference signal for the local oscillator
(LO) on the device. REF IN is an SMA (f) connector with an
impedance of 50 Ω and is a single-ended reference input. REF IN
accepts a 10 MHz signal with a minimum input power of 0 dBm
(.632 Vpk-pk) and a maximum input power of 15 dBm (3.56 Vpk-pk)
for a square wave or sine wave.

USRP-2920/2921/2922 Getting Started Guide

  | 

© National Instruments

  | 

17

Summary of Contents for USRP-2920























Reviews: