Verifying the Kit Contents
2
3
5
4
6
1
NI USRP-2920R
NI USRP-2920R
1. USRP Device
2. AC/DC Power Supply and Power Cable
3. Shielded Ethernet Cable
4. SMA (m)-to-SMA (m) Cable
5. 30 dB SMA Attenuator
6. Getting Started Guide (This Document) and
Safety, Environmental, and Regulatory
Information Document
Notice
If you directly connect or cable a signal generator to your device, or if you
connect multiple USRP devices together, you must connect a 30 dB attenuator to the
RF input (RX1 or RX2) of each receiving USRP device.
Other Required Item(s)
In addition to the kit contents, you must provide a computer with available gigabit Ethernet
interface.
Optional Items
•
LabVIEW Modulation Toolkit (MT), available for download at
included in LabVIEW Communications System Design Suite, which includes MT VIs
and functions, examples, and documentation
Note
You must install the LabVIEW Modulation Toolkit for proper operation
of the NI-USRP Modulation Toolkit example VIs.
•
LabVIEW Digital Filter Design Toolkit, available for download at
included in LabVIEW Communications System Design Suite
•
LabVIEW MathScript RT Module, available for download at
•
USRP MIMO sync and data cable, available at
ni.com
, to synchronize clock sources
USRP-2930/2932 Getting Started Guide
|
© National Instruments
|
3
