Unpacking the Kit
Notice
To prevent electrostatic discharge (ESD) from damaging the device, ground
yourself using a grounding strap or by holding a grounded object, such as your
computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Notice
Never touch the exposed pins of connectors.
Note
Do not install a device if it appears damaged in any way.
3.
Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Figure 1. Kit Contents
1
3
2
RF 0
RF 1
AUX I/O
3.3 VDC MAX
1G/10G ETH
SFP+ Ports
NI USRP-2974
10 MHz – 6 GHz, GPS-Disciplined Cloc
k (160 MHz BW)
4
5
1. USRP-2974
2. Getting Started Guide (This Document)
3. 30 dB SMA Attenuator
4. SMA (m)-to-SMA (m) Cable
5. Power Supply
Notice
If you directly connect or cable a signal generator to your device, or if you
connect multiple devices together, you must connect a 30 dB attenuator to the RF
input (RX1 or RX2) of each receiving USRP-2974.
2
|
ni.com
|
USRP-2974 Getting Started Guide
