background image

Chapter 1

Introduction

©

 National Instruments Corporation

1-3

NI PXI/PCI-1428 User Manual

The following sections provide an overview of the driver software and the 
application software. For detailed information about individual software 
packages, refer to the documentation specific to each package.

NI-IMAQ Driver Software

The NI-IMAQ driver software ships with the NI 1428. NI-IMAQ has an 
extensive library of functions—such as routines for video configuration, 
continuous and single shot image acquisition, memory buffer allocation, 
trigger control, and device configuration—you can call from the 
application development environment (ADE). NI-IMAQ handles many of 
the complex issues between the computer and the image acquisition device, 
such as programming interrupts and camera control.

NI-IMAQ performs all functions required for acquiring and saving images 
but does not perform image analysis. For image analysis functionality, refer 
to th

National Instruments Application Software

 section.

NI-IMAQ is also the interface path between the NI 1428 and LabVIEW, 
LabWindows

/CVI

, or a text-based programming environment. The 

NI-IMAQ software kit includes a series of libraries for image acquisition 
for LabVIEW, LabWindows/CVI, and Measurement Studio, which 
contains libraries for Microsoft Visual Basic.

NI-IMAQ features both high-level and low-level functions. Examples 
of high-level functions include the sequences to acquire images in 
multi-buffer, single-shot, or continuous mode. An example of a low-level 
function is configuring an image sequence, since it requires advanced 
understanding of the image acquisition device and image acquisition.

National Instruments Application Software

This section describes the National Instruments application software 
packages you can use to analyze and process the images you acquire with 
the NI 1428.

Vision Builder for Automated Inspection

NI Vision Builder for Automated Inspection (AI) is configurable machine 
vision software that you can use to prototype, benchmark, and deploy 
applications. Vision Builder AI does not require programming, but is 
scalable to powerful programming environments.

Summary of Contents for Vision PXI/PCI-1428




































Reviews: