Chapter 2 Configuring the VXI-1200
© National Instruments Corporation
2-5
VXI-1200 User Manual
4.
Press down and back to allow both the center and rear hooks to
engage fully into the card guide.
5.
Lower the front of the director and allow the snap-in hook to rest
on the card guide (3).
6.
With a slotted screwdriver or similar flat-bladed tool, depress the
spring hook (4) at a slight downward angle, applying light pressure
to the logo area. This will cause the
snap-in hook to firmly seat the
director into place.
7.
To remove the airflow director, depress the snap-in hook (4) from
the front with a flat-bladed tool. This will unlatch the hook and
allow removal from the card guide at the front end.
8.
Pull forward to release the fixed hooks at the center and rear.
