Chapter
5 Maintenance
VXI-1200 User Manual
5-4
© National Instruments Corporation
Cleaning the Fan Filters
The module cooling filter or supply filter is easily removed from the
rear of the mainframe as shown in Figure 5-1.
Figure 5-1. Cleaning the Fan Filters
1.
Pry off the plastic grill retaining the supply fan filter. Use a
flat-blade screwdriver if necessary.
2.
Remove the supply fan filter toward the rear.
3.
Clean the supply fan filter by washing in a mild soap solution, and
then vacuuming or blowing air through the filter. Rinse the filter
with water and allow to dry before replacing it in the mainframe.
