Chapter 3
Configuration and Default Settings
©
National Instruments Corporation
3-3
to configure a VXI-MXI-2, for your convenience, Tables 3-5 through 3-7
contain a summary of the software default settings for the VXI-MXI-2.
VXI-MXI-2
This section summarizes the software default settings for the VXI-MXI-2.
This information is included for your convenience in case you have any of
these modules in your system.
Table 3-2.
VXIpc T&M Explorer Device Tab Default Settings
Editor Field
Default Setting
Logical address
0
Device class
Message based
Size of Servant area
0
Number of handlers
1
Number of interrupters
0
Table 3-3.
VXIpc T&M Explorer Shared Memory Tab Default Settings
Editor Field
Default Setting
Memory sharing
A32
Shared RAM size
64 KB (when sharing memory)
Reserved physical memory
64 KB (when sharing memory)
Lower half window byte swapping
Disabled
Upper half window byte swapping
Disabled
Map upper and lower halves at
same PCI address
Disabled
Table 3-4.
VXIpc T&M Explorer PCI Tab Default Settings
Editor Field
Default Setting
Low-level register access API
support
Enabled
User window size
128 MB
