NI WSN-3212 User Guide and Specifications
8
ni.com
Note
Use thread-forming screws to permanently affix the DIN rail clip to the device. Unscrewing
and reinstalling the thread-forming screws will produce a compromised connection between the DIN
rail clip and the device.
1.
Fasten the DIN rail clip to the NI WSN-3212 using a number 2 Phillips screwdriver and the
four 8-32
×
5/16 in. thread-forming screws that shipped with the DIN rail clip(s). Figure 5 shows
how to fasten the DIN rail clip to the NI WSN-3212.
Caution
Do
not
use screws longer than 5/16 in. to fasten the DIN rail clip to the NI WSN-3212.
Figure 5.
NI WSN-3212 Device DIN Rail Installation
2.
Insert one edge of the DIN rail into the deeper opening of the DIN rail clip, as shown in Figure 6.
Figure 6.
DIN Rail Clip Installation
3.
Press down firmly on the NI WSN-3212 to compress the spring until the clip locks into place on
the DIN rail.
1
DIN Rail Clip (Without Device)
2
DIN Rail
2
1