©
National Instruments Corporation
11
NI WSN-3230/3231 User Guide and Specifications
Figure 9.
Integrated Panel Mount Slots
Caution
Disconnect power before removing the device from the panel.
Setting Up the NI WSN-3230/3231 Device
The following sections discuss setting up the NI WSN-3230/3231 for use.
Installing the Software
For more information about NI-WSN software, go to
ni.com/info
and enter
wsnsoftware
.
You must be an administrator to install NI software and devices on your computer. Before connecting
the hardware, install the following software in the following order:
1.
NI LabVIEW 2011 or later
2.
NI LabVIEW Real-Time Module 2011 or later (required for NI 9795 and NI 9792 support)
3.
NI-RIO 4.0 or later (required for NI 9795 support)
4.
NI LabVIEW WSN Module 2011 or later, which installs NI-WSN 1.3 or later (required) and
NI MAX (required)
5.
NI-WSN 1.3 or later (includes NI MAX)
Tip
NI-WSN 1.3 or later and NI MAX are also included on the software installation disc included
with your NI WSN gateway and are also available for download at
ni.com/support
.
Note
After installation of NI-WSN, the
NI Wireless Sensor Network Getting Started Guide
is
available from
Start»All Programs»National Instruments»NI-WSN
.
