Special Features for Libraries and Technicians
Section 3
Disable
Set the player to be used without a battery.
If the player is to be used without a battery and this option is set, error messages related to battery-charge
status are not reported to the patron.
Note:
Selecting this option, even if a battery is present, will not damage the player. However, the
player’s volatile memory life may be shortened.
Response
The player announces
“Battery disabled.”
The player then announces the current menu item
“Battery.”
Enable
Set the player to be used with a battery (normal state).
When the player has a battery installed, enabling this option will also enable reporting of battery
condition to the patron.
Do not unplug the player without powering off when operating without a battery. Certain parameters
could be lost if the player is unplugged without powering off.
Response
January 2009
Digital Talking-Book Player
40
The player announces
“Battery enabled.”
The player then announces the current menu item
“Battery.”
Commands
Reset
This option resets all the battery statistics relative to the
current
battery pack.
The player announces
“Battery statistics for the current battery have been erased from the
internal memory.”
Response
The player then announces the current menu item
“Battery.”
Replace with Full Battery
This option resets all the battery statistics relative to the current battery pack and announces that a fully
charged battery has been inserted in the player.
Note:
It takes at least 5 seconds before the status is updated. If the status is queried before that
5-second delay elapses, the result will be inaccurate.
The player announces
“Battery statistics for the current battery have been erased from the
internal memory.”
Response
The player then announces the current menu item
“Battery.”
Library Guide