DOWN
UP
SET
MODE
“SET MODE” - PRESS
DOWN
FOR 3 SECONDS
TEMPERATURE
BATTERY PROTECTION
HIGH
11.6V
9.6V
LOW
THE FRIDGE WILL AUTOMATICALLY
DEFAULT TO THE
HIGH
CUT-OUT
SETTING WHEN INITIALLY
CONNECTING TO THE BATTERY.
SELECTING
LOW
WILL ALLOW THE
BATTERY TO BE COMPLETELY
DRAINED.
SPEED CONTROL
TURBO
MANUAL
TURBO
AUTO
THE FRIDGE WILL OPERATE ON
LOW-SPEED
WHEN CONNECTED TO A BATTERY BELOW 12.6V.
SHOULD THE USER REQUIRE MAXIMUM POWER,
PRESS THE MANUAL
TURBO
BUTTON.
THE FRIDGE AUTOMATICALLY SELECTS
HIGH-
SPEED
(AUTO TURBO) FOR BATTERY > 13.1V.
Setting the operating temperature
Using the speed control
Battery protection
The control panel of the Weekender is fitted with an easy to
operate temperature control and display.
During normal operation, the display will show the currently
measured internal temperature of the refrigerator.
To change the temperature setting, first enter the SET mode by pressing the button for
3 seconds. The SET MODE light will start to flash and the current temperature setting will be
displayed.
Press the or buttons to change the setting.
Once the desired setting is reached, release the buttons.
The new setting will take effect and the display will return
to the currently measured temperature after 10 seconds.
The thermostat is limited to
temperatures between 20
°
C
and -30
°
C
i
The Weekender features a 2-stage speed control for optimising
efficiency during running.
Running the refrigerator at high speed increases the cooling speed
and allows fridge contents to be cooled quickly.
Running at low speed reduces power consumption and optimises
effieciency.
The battery protection feature of the Weekender is designed to protect
batteries from being completely discharged. When the preset voltage is
reached, the Weekender will stop running and indicate a low-voltage error.
The user has the option to switch between two preset voltages by pressing
the button for 3 seconds. The chosen preset will be displayed.
The option exists to over-ride the automatic speed by pressing the speed control button for
3 seconds. When enabled, the MANUAL TURBO light will be illuminated and the Weekender
will run in high speed.
NOTE - When running at high speed, power consumption is increased.
A lead-acid battery at 11.6 volts is considered flat and should be recharged as soon as possible.
The 9.6V setting allows the user to force the Weekender to continue to run until 9.6 volts is
reached. Discharging a battery to this level is not recommended.
When connected to 230V mains power, the Weekender will default to the 9.6V setting.
5
Summary of Contents for Weekender
Page 1: ...Portable Fridge Freezer ...
