Revision 1.2 (Confidential)
11
www.national.com
Geode™
S
P3G
X
01
FIGURE 7. Button Configuration Screen
2.3
RADIO CONFIGURATION OPTIONS
The Radio Configuration options screen, shown in Figure 8, allows the user to define the system ID and the RF link chan-
nel. The system ID is the 802.11 SS ID shared between the base station and tablet. A base station associates only with
a tablet that shares the same SS ID. If the SS ID of the base station and tablet do not match, the base station will ignore
data coming from the tablet. The “DS channel” is the radio channel used by the base station. Touching the “Configure
Access Point” link loads the page “http://manage.ap” to allow the user to change the settings of the access point.
2.4
SOFTWARE IMAGE VERSION
The software image version indicates the current version of the software. In addition, the page contains release notes on
changes made to the previous version. Links at the bottom of the page will go to either the initial WebPAD system config-
uration page or to the browser configuration page.
FIGURE 8. Radio Configuration Screen
Hardware Button Configuration
BUTx = action[type]
BUTx is a button identifier for BUT1 thru BUT6
WebPAD Configuration
Update
‘action’ is a key, macro or a command definition – ‘KEY’, ‘MAC’ or ‘CMD’
‘type’ for commands must be the actual command string to execute
‘type’ for key definitions are: ‘UP’; ‘DN’, ‘LF’, ‘RT’
‘type’ for macro key definitions are ‘NXT’
BUT1 =
BUT2 =
BUT3 =
BUT4 =
BUT5 =
BUT6 =
KEY[UP]
KEY[DN]
KEY[LT]
KEY[RT]
MAC[NXT]
CMD[/usr/webpad/bin/keypad]
The System ID is the 802.11 SS ID shared between a base and client pair. A base will only allow a client
to associate if they share the same SS ID. You may set the SS ID of the client here. It is a string of up to
32 alphanumeric characters.
Radio Configuration
WebPAD Configuration
Update
System ID:
webpad
The radio channel used by the base. A number between 0-11.
DS Channel:
6
Configure Access Point