background image

#800-160 

Replacement bulb, 12v 20 watt halogen bi-pin 

#965-160 

Eyepiece reticle, 10mm/100 div. 

 

LIMITED LIFETIME WARRANTY 

 

National warrants this microscope to be free from defects in material and workmanship under normal use and service 
for the life of the instrument. The warranty does not cover damage resulting from abuse or misuse, repairs or 
alterations performed by other than authorized repair technicians, or damage occurring in transit. The warranty does 
not cover bulbs, power supplies, rechargers, batteries, fuses, cords, or add-on accessories such as mechanical 
specimen holders that are not built into the microscope stage as an integral part of original manufacture. Warranty 
does not cover lenses that have become inoperable due to excessive dirtiness as a result of misuse or lack of normal 
maintenance.  
 
Any cameras and software supplied with this microscope are warranted from date of purchase as follows:  
 

Camera, 1-year limited warranty:  

Manufacturer warrants camera to be free from defects in material and 

workmanship under normal use and service for 1 year from date of purchase.  It does not cover damage 
resulting from abuse or misuse, repairs or alterations performed by other than the manufacturer, or damage 
occurring in transit. 
 

Software, 90-day limited warranty:

  Manufacturer warrants software to be free from defects in material and 

workmanship under normal use and service for 90 days from date of purchase. 

 
Other than set forth above, National hereby disclaims all warranties, express or implied, of fitness for a particular 
purpose. 

 

While it is not necessary to register your purchase of a microscope, any camera or software must be registered by 
completing and mailing the warranty registration card enclosed with such product.  

 

For warranty service, instrument should be well packed to avoid damage in transit, accompanied by a description of 
the difficulty and return instructions, and shipped postage prepaid to National at the address below. National will repair 
or replace at no charge and return postage prepaid. 

For customers living outside the United States, National will 

provide standard warranty service.  However, all inbound & outbound costs are the responsibility of the consumer. 

 

If failure was caused by misuse, alterations, accident or abnormal conditions of operation, an estimate for repairs will 
be submitted for approval prior to work being performed. 

 

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. If you 
have questions concerning this product or warranty, contact the dealer from which it was purchased. You may also 
contact National at the following address and ask for warranty assistance. 

 

If you have questions concerning this product or warranty, contact dealer from which it was purchased.  Or contact 
National, asking for warranty assistance. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for DC5-163













Reviews: