GUITAR RIG KONTROL Hardware Reference – 20
►
s
amPle
r
ate
: Choose a sample rate that is compatible with your music application and
suited to your computing power. Per default, the sample rate is set to 44100 Hz
(CD-Quality). Higher sample rates may improve sound quality, but will cause a higher
CPU load as well.
It is recommended that you try the latency presets first and then continue with the
subsequent steps of the installation. Once you are finished, you should revisit the
Audio
and MIDI Settings
to figure out the best latency setting for your system. If audio dropouts
occur with the preset
minimal latency
, you can try the
low latency
or
standard latency
set-
tings instead. Higher latency values will reduce the probability of audio dropouts.
4.3.2 Using the RIG KONTROL as your Default Audio Interface
If you want to use the RIG KONTROL for playback of all audio applications on your
computer (not only for music software), you have to set it as your default audio interface.
For Windows XP, this works as follows:
1.
Open
Start > Control Panel > Sounds and Audio Devices.
2.
Select the “Audio” tab.
3.
In the “Sound playback” and “Sound recording” sections, click on the Default Device
menu, and then select
RIG KONTROL
.
4.
Click OK to close the “Sounds and Audio Devices” dialog.
Summary of Contents for Guitar Rig Kontrol
Page 1: ...HARDWARE REFERENCE ...
