3.
Check that the
IO
button is active on the left of the Mixer — if not, click it to enable it
and display the input/output settings of each channel strip.
4.
Above the fader area in the channel strip of the Sound or Group you want to configure,
click the bigger field on the right (labeled
MIDI IN
by default) and select the desired MIDI
port in the menu.
This is equivalent to setting the
Source
parameter described above.
If MASCHINE is running as a plug-in you see a
MIDI IN
button instead. Click it to enable
the MIDI input from the host.
This is equivalent to enabling the
Active
button described above.
Audio Routing, Remote Control, and Macro Controls
Using MIDI Control and Host Automation
MASCHINE 2 - Manual - 319
