▪
Plug-ins:
◦
Saturator: in Tube mode, the
Bass Overload
button (
MAIN
section) and
Bypass
button
(
EQ
section).
◦
Percussion (Drumsynth): in Fractal mode, the
Tune Hold
button in the
Main
page.
▪
Channel properties:
◦
Sound’s and Group’s Output properties: the
Cue
button in the
Audio
page.
◦
Group’s Input properties: the
Root Note
knob in the
MIDI
page.
◦
Master’s Groove properties: the
Amount
knob and
Invert
toggle in the
Swing
page.
You will notice that the rules for automatable parameters are the same as for modulata-
ble parameters except that modulatable parameters can only be found in Sounds and
Groups (not in the Master). In other words, at the Sound and Group level the same pa-
rameters are both automatable and modulatable. For more information on modulation
please refer to section
6.4, Recording and Editing Modulation
.
Also note that your Macro Controls will be automatable if, and only if, the parameters they are
controlling are themselves automatable. For more information on Macro Controls please refer to
section
7.3, Creating Custom Sets of Parameters with the Macro Controls
.
Assigning Host Automation IDs to Parameters (MASCHINE as Plug-in)
1.
Click the down-pointing arrow in the bottom left corner of the Control area to open the
Assignment area underneath.
Audio Routing, Remote Control, and Macro Controls
Using MIDI Control and Host Automation
MASCHINE 2 - Manual - 325
