1.
Click the header of the Master/Cue strip in the top right corner of the Mixer.
If the Mixer was showing Sound channels, it switches to the Group level. The Master/Cue
channel strip appears and is put under focus.
2.
Click the headphone icon in the Master header.
→
The Master channel strip switches to the Cue channel strip. Here you can adjust the Cue
channel’s level and panoramic position, along with the destination you want to send the
Cue channel to. As destination, choose for example another output pair into which you
will have plugged your headphones. These settings are described in section
figuring the Master and Cue Outputs of MASCHINE
8.3
The Plug-in Chain
In the middle of the Mix view, right under the Mixer, you see an horizontal bar listing all Plug-
ins loaded in the focused channel: the Plug-in Chain. In the Plug-in Chain, Plug-ins are ar-
ranged into an horizontal series, the audio travelling from left to right through each Plug-in of
that channel.
A Plug-in Chain with the Compressor selected and the EQ bypassed.
Except for its horizontal layout, the Plug-in Chain has the same functionality as the Plug-in
List found in the channel strips of the Mixer above — namely to organize the Plug-ins of that
channel:
Controlling Your Mix
The Plug-in Chain
MASCHINE 2 - Manual - 357
