9.2.3
Kick – Dusty
The Dusty kick is an electronic kick with an organic feel. It’s capable of broken, dusty sounds
but can also open up to a thundering warehouse boom.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See
for more information on this.
Main Page
Element
Description
MAIN Section
Engine
Selects the engine used in the Kick Plug-in. If you change this
setting, please refer to
.
Tune
Adjusts the pitch of the drum played by the middle C, measured as
a percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %). For more details see
9.1.5, Pitch Range, Tuning, and
.
Decay
Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Impact
Adjusts the amount of attack and click, measured as a percentage.
Available values range from 0.0 % (soft attack) to 100.0 %
(maximum attack). The default value is 75.0 %.
CHARACTER Section
Filter
Adjusts the timbre of the drum, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 40.0 %).
Increase the value to produce richer high frequencies.
Noise
Adjusts the amount of noise, measured as a percentage. Available
values range from 0.0 to 100.0 % (default: 10.0 %).
Using the Drumsynths
The Kicks
MASCHINE 2 - Manual - 386
