Element
Description
SCALE Section
Velocity
Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
9.3.7
Snare – Chrome
The Chrome snare is an acoustic snare drum emulation with a bright sound. The two modes
available on its
Advanced
page relate to different snare wire characteristics: noisy and crispy.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See
for more information on this.
Main Page
Element
Description
MAIN Section
Engine
Selects the engine used in the Snare Plug-in. If you change this
setting, please refer to
.
Tune
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 60.00 to
84.00. The default value is 72.00. For more details see Pitch
Range, Tuning, and MIDI Notes.
Decay
Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Using the Drumsynths
The Snares
MASCHINE 2 - Manual - 411
