Action
Procedure
Bypass an effect
Click the
FX
icon (in Arrange view) or the little square (in Mix
view) at the left of the effect name in the Plug-in List. Click
again to re-enable the effect.
Save the current effect
settings as preset
Open the Plug-in menu, and select
Save As…
at the bottom
of the menu.
Recall an effect preset
Use the Browser (see chapter
in menu and select
Open…
at the bottom of the menu.
Native Instruments and External
Effects
Open/close the effect window Arrange view: Click the little window icon in the top left
corner of the Parameter area (at the left of the first page tab).
Mix view: In the Plug-in Strip under the Mixer, click the little
arrow in the top left corner of the effect panel.
Save the current settings as
default preset for this effect
Open the Plug-in menu, and select
Save As Default…
at the
bottom of the menu.
For detailed information on these topics, please refer to
. You will find
more details on the specific operations available for Native Instruments and External Effects in
section
5.2.6, Page 6: Velocity / Modwheel
.
10.1.3 Using the Side-Chain Input
For certain Plug-ins, MASCHINE allows you to use a side-chain input to control how the effects
process the audio.
What Is a Side-Chain Input?
If we consider an effect unit that processes the signal incoming at its main input, side-chaining
means using a secondary signal (the “side-chain signal”) fed to a secondary input of the unit
(the “side-chain input”) to control the behavior of the processing. Usually the amplitude of the
side-chain signal will determine
how much
the main signal will be processed by the unit.
Using Effects
Applying Effects to a Sound, a Group or the Master
MASCHINE 2 - Manual - 466