5
3.
GENERAL:
3.1 Purpose of the Manual
This manual is an integral part of the unit and must be given to the purchaser. It was edited
with the purpose of supplying the user and service personnel, in a clear and comprehensive
manner, all necessary information for the use and maintenance of the
Natura
™
water
dispenser. It is necessary to comply with the instruction’s content contained in this manual in
order to guarantee the correct working condition of the machine.
3.2 Technical Assistance and Maintenance
For any and all other technical issues, you must contact the Technical Service Department of
the Distributor or Vendor of the Unit or you may contact:
Natura Water, Inc
222 East Campus View Blvd
Columbus, Ohio 43235
3.3 Description of Functions
The
Natura
®
water dispenser units are made for:
a)
WATER TREATMENT
The Treatment Phase (Diagram 1)
Water is filtered and disinfected through an organic component purification system. Chlorine,
organic and inorganic chemical compounds, which are often found in wells and water
aqueducts, are filtered out by the sediment and carbon filters and finally Nano Ceram .
b)
CARBONATION
The Carbonation Phase (Diagram 3)
After water treatment phase, the water is pushed into a small stainless steel cylindrical tank
by a high pressure pump, causing the water to mix with the CO
2
by means of a percolation
process called the “venture effect”.
In this process, the water absorbs CO
2
and becomes
carbonated.
