Page 6 of 9
Operating Instructions
•
Be sure products are securely fastened before using.
•
Product should be placed in a well ventilated area, free from flammable gases.
•
No altercations shall be made to this product.
•
Do not use if product is damaged. Replace damaged parts before using.
•
Do not wear dangling objects or jewelry when working with electrical equipment.
•
Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant
safety glasses with side shields.
•
Do not overreach. Keep proper footing and balance at all times.
•
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
•
Do not allow children to handle the solar panel.
•
Do not drop a tool or other item on the solar panel.
•
When connecting the system for use, ensure that the connections are positive-to-positive and
negative-to-negative. Wrong connections will cause damage to the panel and/or the battery.
1. Connect the included battery clamps or the DC plug (49689 panel) to the wires from the panel by
the J-plug connectors.
2. If using the clamps: Attach the positive battery clamp (red, +) to the positive battery terminal (+)
and the negative battery clamp (black, -) to the negative battery terminal (-).
If using
the DC plug: insert the plug into the vehicle’s 12-colt power socket.
3. Expose the solar panel to sunlight.
The solar panel will produce a current when exposed to sunlight. Direct sunlight will produce best
results. Diffused or low light will result in lower or no output.
After Each Use
•
Clean the panel, battery clamps and other parts of dirt and debris to prepare it for the next use.
Wipe the components with a damp cloth but DO NOT use soap or solvents.
•
Dry the components so that no moisture remains to possibly corrode the electrical connections.
•
DO NOT
pour chemicals on the panel when cleaning.
Store the solar panel when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the panel and clips for good working condition prior to storage and again before use.
Maintenance
The solar panel requires no maintenance except occasional cleaning and replacement of damaged or
worn parts. Use only identical replacement components. Components that may be suitable for one
device may create a risk of injury when used with another device.
