Electric Boiler Controller NELBC-1
Fields Network and Security may be filled in manually using the virtual keyboard below but the
easier way is to press the button to scan for nearby WiFi networks and then select the required
network from the provided list. In this case the only thing that should be filled in manually is the
password. After all the required information is filled in then button
should be pressed for
confirmation and sending the data to the WiFi module.
When scan button is pressed then the controller displays the screen bellow showing the number or
currently found WiFi networks.
When scanning completes then the controller displays a list of the found networks from which the
required network should be selected. If required network is not in the list then pressing button
displays back the network parameters screen and a new scanning may be started. The controller will
display this screen too if no networks are found. In both cases, a new scanning may be started or the
required data may be filled in manually.
User Manual / revision 1.2
стр. 27 от 36
Number of found networks
