Design I view.
If the water heater is off, the electrical heater and the boiler's circulation pump don't turn on. The
solar installation keeps working normally to avoid overheating of the solar collector. Safe modes
also function normally: preventing the freezing of the tank and the solar collector and preventing
the overheating of the solar collector by automatically turning on the
Holiday
mode.
Changing the information from Measured or set parameters field
In all work modes this field shows information about the measured values, that are not displayed on
the main screen, as well as about some of the set parameters for the water heater's control. By
pressing the
View/Enter
button all the possible data appears successively in the following order:
Set temperature for heating with the electrical heater.
Temperature measured in the bottom section of the water heater
Differential temperature for turning on/off the solar collector's
circulation pump
Differential temperature for turning on/off the boiler's circulation
pump
Date
Anode protector's condition indicator
Consumed electricity on day rate
Consumed electricity on night rate
(
the view is below
)
** diagrams for the consumed electricity and for the pump's work
Day rate start time to calculate the consumed electricity
Night rate start time to calculate the consumed electricity
* Start of the first interval (timer) that allows the heater's work
NHC-H42-2 Reference Manual ver 1.6
стр. 9 / 18
Anode protector's
condition
