NRC-6-SV
Room Thermostat and Remote Control Module
How to change the set temperature for room heating
When the controller is on the “Main Screen,” by pressing the up/down buttons (
▲
/
▼)
,
the
controller switches to a screen where the previously set temperature can be changed. The
temperature will move by 0.5 degrees Celsius every time a button is pressed. If you hold one
of the buttons (
▲
/
▼)
the temperature automatically increases by 2.5 degrees Celsius every
second the button is being held. Press the Menu button (
)
to save the changes and return to
the main screen. If you don’t press any of the buttons for more than 5 seconds, the controller
will switch back to the main screen and no changes will be saved.
Additional information about burner’s operation
By pressing the right navigation button
(
►
)
, while the controller is on the “
Main screen
”,
you can
proceed
t
o
the additional information screens.
Statistical charts about hourly pellet consumption
The first screen is titled “
Pellets consumption
.” It contains charted data about your pellet
consumption for the last four days. First thing that the screen shows
is information about the
current day
and by using the “
▲
” or “
▼
” buttons, you can navigate through the rest of the
information about the rest of the four days. Data is presented on the screen in the form of a
histogram. The horizontal axis of the histogram is divided into 24 hours and the vertical axis
represents the consumed pellets in kilograms for the relevant hour. Above the chart is the
corresponding date for the currently displayed information and on the bottom is the total daily
pellet consumption.
User Manual Ver 3.3
p.10 /21
