NRC-6-SV
Room Thermostat and Remote Control Module
Keep in mind that pellets consumption for the current day will not be affected by the reset,
because the program starts recording data from 00:00 of the date displayed on the screen.
By pressing the left navigation button (◄) on “
Information
” screen you will be brought back
to the “
Pellets consumption
” screen.
On top of these parameters, there is other data, important for the job of the burner, which can
be brought out to the main screen.
Software and controller version
To find information about the software and controller versions, you need the press the down
button (
▼)
while being in the “
WiFi connections
” screen.
Diagnostics
While on the “
Information
” screen, by pressing the right navigation button (
►
)
you will be
redirected to the “
Diagnostics
” screen. It provides a list with information about previously
registered errors and the exact time and date when they have occurred. If the total number of
errors is more than four, the button
s(
▲
or
▼
) can help you navigate through the previous or
next page, since only four notifications fit on the screen at once. If you h
old the
Menu
button
(
)
for more than two seconds, it will reset the accumulated diagnostics information. The
“star” symbol marks the latest registered notification.
User Manual Ver 3.3
p.12 /21
