NRC-6-SV
Room Thermostat and Remote Control Module
The button
(Menu) is used to save the changed parameters and to exit to the previous
screen. There is a default maximum waiting time for having no buttons pressed. After this
time passes, the controller brings you back to the previous screen and does not save any
changes that were made.
Pressing and holding the navigation buttons in most cases will lead to a repetition of the
function of the button. The repetition is 5 times per second and leads to increasing or
decreasing of the selected parameter value or moving the mark between parameters.
User parameters settings
While having the main screen on the display, a short pressing of the
Menu
button will
lead to a screen with options to correct some of the parameter groups. Press the up or
down navigation buttons (▲ ▼) to move the red line that indicates the selected row.
Press the right navigation button (►) to select the group setting and to enter the menu
corresponding to the selected row. You will continue working in the way described
above.
Time and Date
setting– The time format is 24-hours and the date format is
DD/MM/YY. The day of the week is automatically calculated after setting the date. If
after the initial setup, you change the time, the timer for seconds will reset. Changing
only the date will not reset the seconds. In order for the automatic check of the time to
work, the controller needs to be connected to the Internet and to the Naturela system.
User Manual Ver 3.3
p.16 /21
