Electronic pellet burner controller - NPBC-V6T-2
I
NTRODUCTION
The controller
NPBC-V6T-1
is using the new control module with 3.5'' IPS display with
capacitive Touch sensor -NRC-8. The standart '' Executive '' module for the controller is
NBPC-
V4E-1
. It is also possible to work with older version of the executive modules – NPBC-V4C.
Comparing the older model NPBC-V4C the controllers NPBC-V6T have many advantages
and some of the most important are:
•
New vision of the display with more displayed information. With new IPS technology of
the screen, it has extending side viewing angle and the image is seen equally good from all
directions.
•
The new more modern touch-based interface is with virtual buttons and also with the
option for changing to function - icons. In addition to scrolling through the virtual buttons,
the settings parameters can also be selected directly by touching which makes the
operation with NRC-8 more comfortable, easier and faster.
•
Thanks to the larger touch screen, parameters, which are numbers or text, are entered
directly by a numeric or alphanumeric keypad. This is easier than the old control module,
which has only two buttons - for increase and decrease. In addition when entering numeric
parameters, their permissible value is displayed in a special field. If the value is out of
limits, the field in which the parameter is entered is outlined in a red box, and the newly
entered value of the parameter is not saved.
•
No need to use a smartphone or a computer, when connecting the Wi-Fi module to the
home Internet network. The name of the home Wi-Fi network can be selected directly from
the screen of the control module from a list of scanned networks or manually entered.
Same option with the password and encoding - by the virtual keyboard of the touch screen
of the NRC-8.
•
Possibility to include additional cleaning mechanism with self-control of both direction
from FC and AUX output, for example linear moving grates.
•
Possibility for individual calibration of the auger capacity and calorific value of the pellets
for each fuel profile.
•
A "Frost Protection" function has been added to protect the system from frost. When a
critical low temperature is detected in the boiler, the burner ignites automatically, even
when it is switched off. Тhere is an additional option for the periodic switching on of the
circulating pumps to move the liquid in the heating installation.
•
Individual setting of the Hysteresis for re-ignition of the burner, independent of the settings
of the power modulation.
•
Possibility for speed setting of the two fans when cleaning the burner as well as the
separate settings for extinguish phase, independent on the settings of different powers in
burning mode.
•
Possibility for automatically reduce the burner power when the temperature of the exhaust
gases exceed the high temperature warning limit.
•
The new NPBC-V4E executive module has more reliable 800V semiconductor switches
and has better circuit solutions to increase its reliability.
User Manual / ver. 1.2
http://www.naturela-bg.com/en/
page 3 of 41
