Nature's Generator Nature's Power Pod, User Manual

How to Connect Your Nature’s Power Pod to Nature’s Generator

You can connect your Nature's Power Pod to your Nature’s Generator to extend the overall run 

time. 

1.  Open the top cover of the Nature's Power Pod, locate the expansion cable, and run the expansion 

cable out of Nature's Power Pod through the opening on the back of the Nature's Power Pod.  

2. Locate Expansion Port on the back of your Nature’s Generator and open the rubber cover. 

3. Connect the expansion cable to the expansion port.

4. The Expansion (Chain Link) Icon will be illuminated on the display of Nature’s Generator to 

indicate it is connected. 

You will experience an increased run time of approximately 167% by adding one Nature's Power 

Pod, approximately 333% by adding two Nature's Power Pods and 500% by adding three Nature's 

Power Pods. 

How to Maintain and Store Your Nature’s Power Pod

Please recharge your Nature's Power Pod once every four months and store in a ventilated, cool 

and dry location.  If possible, please connect your Nature's Power Pod to the solar panel while in 

storage to top off the battery voltage. This keeps battery healthy and prolongs its life.  Failure to 

maintain Nature's Power Pod by these steps can result in battery damage which will void the 

product warranty.

Please clean your Nature's Power Pod with a soft, lint-free cloth. If your Nature's Power Pod is 

especially dirty, moisten a soft, lint-free cloth in a weak detergent solution, squeeze the excess 

moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth to dry your 

Nature's Power Pod.

14

Visit Naturesgenerator.com for More Information