8
How to choose the tower
Your Nature’s Generator is designed to mount on nominal 1.5 inch schedule 40 steel tubing
or piping. The outside diameter of the tubing or piping shall be around 1.875 inch to 1.900
inch. The steel tubing or piping should be available through your local hardware store. Under
no circumstances should plas�c pipe be used to construct a tower. Towers must be capable
of withstanding 160 pounds of load in the horizontal direc�on at the wind turbine.
Visit NaturesGenerator.com for More Information
Cau�on: Choose a calm day and have someone available to help during the installa�on
process.
Cau�on: The blades edges are sharp. Please handle carefully.
Cau�on: Do not assemble the blades before the body is mounted on the pipe or tower.
Cau�on: Do not connect your Nature’s Generator Wind Turbine with Nature’s Generator
un�l all installa�on has been completed.
How to Install your Nature’s Generator Wind Turbine
Step 1: Run the wind turbine cable through the pipe and drag the connector close to the
Nature’s Generator. The female connector shall be close to your Nature's Generator Wind
Turbine and the male connector shall be close to your Nature's Generator.
Step 2: Connect the wind turbine cable and your Nature's Generator Wind Turbine by
pushing and twis�ng the connectors.
Female
Connector
Male
Connector