MAINTENANCE
Your Nature’s Generator Wind Turbine has been designed to run for long periods without
requiring any maintenance. Performance will be enhanced if you periodically inspect your
system. Review the following simple maintenance procedures and implement every
six months.
Caution: Do not go near the wind turbine during operation.
• Check blades for superficial damage. Replace blades if damaged. It is important not to
use blades that are damaged, as you will lose overall balance, resul�ng in a decrease in
efficiency. Should you no�ce damage to the blade
s, you must replace all 5. The blades
are balanced as sets.
• Check the blade bolts and the nut for �ghtness.
• Check nose cone for cracks and �ghten nuts.
• Wipe any excess dirt build-up from blades.
• Check electrical connec�ons to make sure they are �ght and free from corrosion.
Trouble shooting
Caution: You may require an extra person to assist with these tests.
1. Remove the blade and hub from your Nature's Generator Wind Turbine.
2. Drain your Nature’s Generator to show only one bar or two bars of ba�ery level.
3. Connect your Nature’s Generator Wind Turbine to your Nature’s Generator. And make
sure your Nature's Generator main power is switched off.
4. Set your power drill at speed mode and use an 8mm hex drive bit (not included, please
purchase separately) to spin the rotor sha�.
5. You will see
the LCD
display on your Nature's Generator lights up and then your wind
turbine icon illuminates and the ba�ery bar starts running. It means your Nature’s
Generator Wind Turbine should berecharging your Nature’s Generator fine. You should
also feel resistance on the rotor sha�.
If you have any ques�ons on the trouble shoo�ng procedures, please do not hesitate to
contact our Customer Support line at 800-975-7909 or email us at
support@naturesgenerator.com.
14
Visit NaturesGenerator.com for More Information