13
Capture Number
Camera Name
Interval
Selects how many photos are taken in sequence per trigger in
Camera mode. This setting affects photos taken in Field Scan
mode as well.
Set
Exit
Capture Number
OK
1
MENU
Set
Exit
Camera Name
OK
Input
MENU
Allows the user to set a customised name for the camera. This is
useful for identification purpose when multiple cameras are used
at the same time since the camera will imprint its name on all
photos (but not videos) it captures.
Set
Exit
Interval
OK
MENU
10s
Selects the length of time that the camera will
“
wait
”
until it
responds to any additional triggers from the PIR after an animal
is first detected and remains within the sensor’s range. During
this interval, the camera will not capture photos/videos.
Settings
