Natus ErgoJust LTM and ErgoJust ICU Cart Information For Use
2-10
July 6, 2020
Transporting the Natus ErgoJust LTM and ErgoJust ICU cart
Do not push or pull the cart from the front (keyboard side). Use only the handles
(Figure 1) when transporting the cart. The push/pull handle is integrated into the supplies
basket immediately below the amplifier base unit attachment. Do not use the additional
supplies basket (optional) to maneuver the cart.
Figure 1: Transporting the Natus ErgoJust LTM or ErgoJust ICU cart.
1. Raise the locking levers on all four caster wheels to transport the cart.
2. Push the display monitor down to it’s lowest position.
3. Disconnect the power cord from the ISO or UPS and secure the cord to the cart.
4. Raise locking levers on all four of the caster wheels (raise the left rear locking lever to the up-
most position, see Figure 1 above) and point the casters in the direction of travel.
5. Use the rear handle to push the cart using both hands.
6. If there is a photic stimulator mounted on the cart, swivel the arm and secure it close to the cart
pole to avoid damage during transport.
7. Lower the locking levers on all four caster wheels to lock the cart in position when you have
reached the desired location
Transporting the Natus ErgoJust LTM cart.
Transporting the Natus ErgoJust ICU cart.
