Natus ErgoJust and ErgoJust ICU Cart System
July 6, 2020
3-31
3. Replacing a
damaged handle
NOTE:
If the handle requires replacement, continue with
Replacing a damaged handle
on this
page. If the handle is not damaged, go to
Installing the new basket
on the next page.
1. Loosen the four handle screws and slide the handle up and out from the bottom mast (Figure
1).
Figure 1: Loosen the four mounting screws.
2. Remove the screws from the handle mounting plates and set the damaged handle aside.
IMPORTANT
: Ensure the two mounting plates are orientated properly as shown in Figure 2
before starting the next step.
Figure 2: Proper mounting plates orientation.
Legend Description
A
Indented side
