Natus ErgoJust LTM and ErgoJust ICU Cart Instructions For Use
3-32
July 6, 2020
3. Insert each of the mounting screws through the handle and thread the screws into the mounting
brackets until the ends of the screws are flush with the back side of the brackets (Figure 3).
Figure 3: Thread both screws until they are flush with the bracket.
a. Slide the handle mounting plates into the bottom mast grooves.
b. Adjust the height of the handle as desired and tighten all four of the mounting plates
screws.
4. Install the new
basket
4. Insert the mounting tab on the right side of the basket into the mounting hole on the handle and
then push up on the left side of the basket (Figure 4).
Figure 4: Insert the right side mounting tab into the mounting hole and push the left side of the
basket upward.
Legend Description
A
Flush
B
Handle
C
Bracket
Legend Description
A
Tab
