Natus ErgoJust LTM and ErgoJust ICU Cart Instructions For Use
3-34
July 6, 2020
Reinstalling the video pole mounting brackets -
Natus ErgoJust LTM and ErgoJust ICU
It is recommended to use an assistant when mounting the video pole to avoid injury or
damage to the equipment.
Improper positioning of the two mounting brackets will allow the Video Pole to
separate from the bottom mast, which may damage system components or cause an injury.
1. Place one of the brackets inside the video pole with the indented side positioned against the
video pole as shown in Figure 1.
Figure 1: Proper orientation of the mounting brackets inside the Video Pole.
2. Feed two screws through the Video Pole mounting holes and thread them into the bracket.
3. Continue threading the screws 2 the bracket until the ends of both screws are flush with the
back side of the bracket (Figure 8).
Figure 2: Thread both screws until they are flush with the bracket.
