Natus ErgoJust and ErgoJust ICU Cart System
July 6, 2020
3-35
4. Repeat steps 8 through 10 for the second bracket.
IMPORTANT
: Press all four screws inwards until they are tight against the Video Pole
(Figure 3) when performing the next step. This is necessary to position both brackets properly
in order to slide the brackets into both grooves on the bottom mast.
Figure 3: Press in all four screws tight to the Video Pole.
5. With an assistant, carefully lower the Video Pole onto the bottom mast, ensuring that both
brackets slide inside the two slots (Figure 4).
Figure 4: Proper placement of the mounting brackets inside the bottom mast slots.