RC40 Control manual
7
1.3 Safety precautions
Please design and set up the robot system by trained personnel.The trained personnel
mentioned here refers to the personnel who have received the training of the company or have
the same professional knowledge and skills as the personnel who have read this manual and
been trained.
For design and setup personnel, please follow the following safety precautions.
Operational considerations
1) Operators shall wear work clothes, helmets, safety shoes, etc.
2) When the machine is put into power supply, please confirm that there is no operator within
the action range of the robot.
3)The power must be cut off before entering the action range of the robot for operation.
4) Sometimes, repair, maintenance and other operations must be carried out in the state of
power.At this point, 2 people and 1 group should be carried out Homework.One person should
be in a position where the emergency stop button can be pressed immediately. The other
person should be within the range of the robot's movement, keeping alert and working
quickly.In addition, the withdrawal path should be confirmed before the operation.
5)The load on the wrist and the mechanical arm must be controlled within the allowable
carrying weight.If permission is not complied with the provision of handling weight can lead to
abnormal action or premature damage to mechanical components.
6) Please read the "safety precautions" section of the operation and maintenance manual of
the robot carefully Instructions.
7) Disassembly and operation of parts not covered by the maintenance manual are
Represents a situation where improper handling can result in death
or serious injury to the user, and the risk is very high
Represents a situation where handling errors can result in death or
serious injury to the user
Represents a situation in which handling errors can lead to minor
injuries or property damage to the user
