24
4.2 Opening with double code
1.
Enter the first valid opening code, e.g. 00678912 and press enter
00678912
2.
Now the signal for the input of the second is displayed
3.
Enter another valid opening code, e.g. 10222222 and press enter
10222222
4.
Turn the actuating knob within 4 seconds through 90° clockwise to the stop
Step
Action
Key
5. Silent alarm
If there is a threatening situation, the lock can be opened with simultaneous generation of a silent alarm, provided
the silent alarm has been activated and the lock is connected to an intruder detection system (not included in
the scope of delivery).The alarm code consists of a valid code, the last position/digit of this code is increased or
decreased by one digit.
1.
Enter your 8-digit alarm code, e.g. 001 and press enter
0067891
3
2.
Turn the actuating knob within 4 seconds through 90° clockwise to the stop
Step
Action
Key
• If the result becomes double-digit only the last number is taken (e.g. 9+1=10, enter only 0).
6. Emergency key override
6.1 Opening with the key
1.
Note the position of the rotary handle (marking)
6.1
2.
Insert the Allen wrench up to a stop into a small hole on the bottom side
6.1
3.
Remove the rotary handle to the front, while keeping the Allen wrench pressed
6.2
4.
Removing the Allen wrench and square shaft
6.3
5.
Inserting the key
6.4
6.
Turning the key clockwise to the stop
6.5
7.
The lock is open
7.
U kunt de kluis openen
Step
Action
Figure
1.
Press P
P
2.
Enter your 8-digit master code, e.g. 00678912 and press enter
00678912
3.
Enter P8 and press enter
P8
Step
Action
Key
5.1 (de)Activating silent alarm
5.2 Opening with silent alarm
