17
2. First use
2.1 Battery
When first opening, you need to remove the tab near the battery.
2.2 Choosing a lock function
First, choose the desired lock function. The miniK10’s lock is in locker mode by default (factory
settings). To change the lock function to single mode, follow these steps:
Step
Action
Key
1.
Enter # (1-0-1-0-1-0) *
(The green and red lights will turn on)
#1-0-1-0-1-0*
2.
Enter 1-0 for single user mode
1-0
2.3 First time opening the lock
You can open the lock with the factory-set pre-programmed codes shown below. When first using the
lock, we recommend changing the default factory-set code into a personal one right away.
You will hear a long beeping sound and the green light will turn on. The lock is now set to single user mode.
Step
Action
Key
1.
User code
1-0-1-0
2.
Mastercode
#1-0-1-0-1-0#
The green light will turn on. Turn the knob to the open position and the lock is open.
