ATU-HP Technical Instruction Manual
Page 8-1
Section 8 Wiring Information
Issue 2.0
ATU-HP
TECHNICAL INSTRUCTION MANUAL
Section 8
WIRING INFORMATION
8.1 INTRODUCTION
This section contains wiring information for
hard-wired assemblies of the subject unit.
Refer to Table 8-1 for an itemized listing of
assemblies that have wiring lists.
8.2 WIRING LISTS NOT PROVIDED
Separate wiring lists are not provided for
some assemblies, including:
•
Assemblies that have separate
maintenance manuals. Refer to the
associated maintenance manual for
detailed wiring information of these
assemblies.
•
Assemblies that have their wiring
information adequately depicted/
tabulated on their assembly detail
drawings. Refer to the associated
assembly detail drawing for detailed
wiring information of these assemblies.
8.3 PRINTED WIRING PATTERNS
Printed wiring pattern information is beyond
the scope of this manual. Therefore,
detailed printed wiring patterns for printed
circuit boards are not included.
8.4 WIRE COLOURS
Every effort is made to manufacture the
assemblies using wire that is the colour
tabulated in the ‘Code’ column of the wiring
list tables. In some instances, a white wire
will be substituted. In this case identification
must be determined by locating the assigned
identification number.
8. 5 WIRING LIST PROVIDED
Wiring lists are provided in table format. A
list of the table numbers and the associated
wiring list are shown in Table 8-1. These
lists provide non-printed wiring pattern,
point-to-point (source/destination) inter
-
connecting information.
Table 8-1
Wiring Lists Provided
Table # Description
8-2
Wiring List – ATU-HP
Automatic Antenna Tuning Unit
