Page 24
Security Management
VTracker’s dual zones will display under the security
category of the mobile app, which will include status
for intrusion and high-water depending on the
configuration being used.
If a zone is being used for intrusion, it is necessary to
arm VTracker first as shown below.
Once an alarm is present, it is necessary to clear the
active alert or re-arm VTracker for subsequent alarm
events to occur.
High-water and emergency events will send regardless
of the system armed state.
By default, arming VTracker will also arm the geofene.
To change this, modify the system settings under the
Device Info category.
