45
STOPWATCH
This stopwatch is able to measure and display time in 1/20 ( 1/1)
second united up to max 11 hrs 59 min 59 sec.
The retrograde stopwatch 1/20 ( 1/1) second hands keeps
continuously running for 60 seconds after starting, and then stops at
"0" position.
1. Press pusher "B" to enter the chrono mode.
2. Press pusher "A" to start timing.
3. Press pusher "A" again to stop timing.
4. Press pusher "B" to reset.
Note: Motion of the retrograde stopwatch is a demo. Actual measurement
will be shown when it stopped while "stop" button is pressed.
Correct the stopwatch hands
If after resetting the stopwatch hands it is found that they are not at
the '12' or '0' position, correct them as follows:
1. Pull crown to position "B".
2. Press pusher "A" to set the stopwatch second hand to the "0"
position.
3. Press pusher "B" to set the stopwatch 1/20 second hand to the "0"
position.
4. The stopwatch hands can be advanced rapidly by continuously
pressing pushers "A' or "B".
5. Once the hands return to "0" position, reset time and push crown to
position "A".
