65
2. Press “Set” button to stop and record the timing of the first runner.
("Split" will blink on the display if the split time function is active.
Even though the stop watch is not on display, the timing will
continue to run internally.)
3. Press “Set“ button again to catch up the timing of the second
runner. The stopwatch will jump to show the internal accumulated
time and to carry on timing of the second runner.
4. Press “Adjust” button to stop the timing of the second runner and
record the time.
5. Press “Set” button to reset timing.
ALARM MODE
In alarm mode, press “Adjust” button to enable or disable the Alarm
and Chime function.
Alarm Function
1. Press ”Mode” button until Alarm mode appears.
2. Press “Set” button to select the alarm hour setting, the alarm will
be set to ON.
3. Press “Adjust” button to set the alarm hour.
4. Press “Set” button to select the alarm minute setting and press
“Adjust” button to set the alarm minute.
5. Press “Set” button again to exit the alarm setting.