16
5.
Attach the saddle to the camera
by tightening the screw to the
tripod socket of the camera with
a screwdriver or a coin.
7.
Disengage the zoom/focus gear
using the zoom/focus gear
disengagement lever.
8.
Make sure the camera power is
off and the On/Off control knob
on the housing is in the “off”
position.
9.
Mount the camera by sliding the
attached saddle along the rail in
the housing until it cannot go in
any further.
6.
After ensuring the C/S/M activator
on the sliding bar aligns correctly
with the focus mode selector of
the camera, push the sliding bar
to its inward position. Check that
by rotating the activator, the
focus mode of the camera can be
altered.
