30
•
Soak the housing system in fresh water after each salt water use, during which all control
buttons/knobs should be operated a few times to avoid the accumulation of salt residue;
wipe the housing with a towel before opening.
•
Carefully press the housing lock safety button for a few times to avoid the accumulation
of salt residue.
•
After each day of diving, it is advisable to have the main O-ring in the front part of the
housing removed from its groove with the O-ring remover and inspected for damage.
Also check that the O-ring retains its original circular shape; never stretch the O-ring
excessively or remove it with a sharp object. The O-ring groove should be cleaned to
ensure it is free from any salt deposit or foreign material; lightly coat the O-ring with the
provided lubricant before reinstalling it in the groove. A damaged O-ring should be
discarded immediately and replaced only with one that is provided by NAUTICAM.
•
Replace the main O-ring annually. It is recommended that you ship the housing to our
distributor for a complete overhaul every year or after every 200 dives.
C
ARE AND
M
AINTENANCE
Summary of Contents for NA-E2
Page 1: ...1...
Page 10: ...10 F1 Button F2 Button F3 Button Power Button...
Page 13: ...13 Sacrificial Zinc Anode 1 4 20 Mounting Points...
Page 34: ...34...
